Original – GE DMS Go+ A-Scan Basic Ultrasonic

Description

GE DMS Go+ A-Scan Basic Ultrasonic

Original – GE DMS Go+ A-Scan Basic Ultrasonic

The DMS Go+ Series of A-scan thickness gauges provides accurate, reliable, and comprehensive thickness inspection data in a wide range of applications and environments.

All three models – DMS Go+ Basic, DMS Go+, and DMS Go+ Advanced – feature intuitive, easy-to-use arrow-keypad control and carry out from simple A-scan verification to B-scan and full Data Recording. The three thickness gauges are easy to upgrade with additional features and capabilities in order to form a powerful and flexible NDT inspection tool that meets your corrosion thickness application needs.

The DMS Go+ Series uses the same operating platform and hardware as the state-of-the-art USM Go+ portable flaw detector. This offers the ability to have an A-scan thickness gauge and full-fledged flaw detector in one powerful & flexible instrument.

Applications

The Krautkrämer DMS Go+ is suitable for thickness measurement in a wide variety of applications throughout the industrial and process spectrum. It is especially applicable for corrosion measurement and monitoring, even on coated components and structures and at high temperatures.

Typical applications include:

Oil & Gas

Inspection and monitoring of corrosion in tubes, vessels, and tanks
Measurement of remaining wall thickness through paint coatings

Power Generation

Inspection of complex geometry tubes
Monitoring of boiler efficiency by measuring oxide scale in boiler tubes with special probe OSS-10

Aerospace

Maintenance checks

Metals Industry

Thickness measurement of austenitic materials

Optional applications software such as TopCOAT technology, also allows measurement of coating thickness as well as metal thickness, while Auto-V measurement enables thickness to be measured on components with unknown sound velocities, without the need for a calibration block.

Technical Specifications

Display 5 inch – 800 × 480 pixels, 108 × 65 mm (W x H), > 200 cd/m2
Size (W x H x D) – 175 × 111 × 50 mm (W × H × D)
Weight – 850 g with battery
Protection class – IP 67
Operating temperature – 0 – 55 °C
Battery – Li-Ion, rechargeable, > 8 hours operation time
Power adapter / charger – 100 – 240 V AC, 50/60 Hz
Probe connector – Dual Lemo-00 (T/R)
PC interface – Micro USB
Memory card – SD-Card 16 GB max
Datarecorder – 100.000 readings per file. Multiple files can be stored on SD card 8 file formats, Attachment of A-Scan, B-Scan and micro grid
Pulser – 120 – 250 V, Spike wave, Automatically matched to probe
Pulse Repetition Frequency – 4, 8 or 16 Hz selectable
Receiver – 110 dB dynamic, automatic gain control, Manual –high, -low, -auto
Measurement range – 0,4 – 14.000 m/s (0.01 – 551 “)
Units – mm, inch, μs
Digital Display resolution – 0,01 mm or 0,1 mm (0.001” or 0.01”) selectable
Measurement techniques – Zero crossing, IP to 1st echo, multi echo, TopCoat, Auto-V
Calibration – One-point, Two-point, Auto or Manual On-block and Off-block Zero, Automatic V-Path correction
Display mode – Thickness and A-Scan, Temperature corrected thickness, B-Scan, Min/Max capture, Differential
Compliance – EN 61010,EN 61326-1, EN 12668, ASTM E 1324, E317, ANSI/NCSL Z 540-1-1994, MIL-STD 45662A, MIL-STD 2154, EN 15317