Miting Digital Analyzer

Free shipping worldwide. Orders over $200
Availability: In Stock

Original – GE Phasor XS Ultrasonic Phased Array

Original price was: $5,500.00.Current price is: $3,588.00.

GE Phasor XS Ultrasonic Phased Array-This portable and rugged device combines the value of Phased Array with a code compliant conventional UT flaw detector

Other people want this. 15 people have this in their carts right now.

Description

GE Phasor XS Ultrasonic Phased Array

Original – GE Phasor XS Ultrasonic Phased Array

The GE Phasor XS brings the proven advantages of Phased Array technology to a new – and accessible – level. This portable and rugged device combines the value of Phased Array with a codecompliant conventional UT flaw detector. It is simple to use, easy to learn and specially designed with practical, relevant features.

When used in Phased Array mode, the operator can electronically control multiple beams from one probe. The precise beam control including angle, focus and size, results in improved probability of detection (POD) and sizing. With one scan from one contact location, greater area is covered and comprehensive data can be viewed in real time on a full color sector display. When compared to conventional Ultrasonic inspection, the productivity and cost savings from the Phasor XS are easily measured.

Productivity gains

When the inspection requires a different angle with conventional ultrasonic testing, the operator must change his probe and re-visualize the integration of the new information. A different time base and sensitivity level is represented. Although this is not a problem for the skilled operator, it takes time. Through the power of Phasor XS, these inefficiencies are drastically minimized.

Real time color imaging from the Phasor XS supplies an integrated cross-sectional visualization of the part originating from multiple angles. A single A-Scan can also be selected for display in combination with the image. With a single probe, you can achieve more than ever before – and in less time

Overall, the Phasor XS provides:

Improved area coverage, faster results
More information from one scan of the part
Better recorded result from the generation of an image
One probe replicates the capabilities of many conventional UT probes and wedges
Time and cost savings from reduced hours evaluating indications with multiple angles

Measurable time savings

Some weld inspections require a complete scan with three separate angles. Using the Phasor XS can result in a time savings of two thirds!

Test quality improvements

Defect orientation is a prediction made in the development of a test procedure and an inspection angle is chosen based on this prediction. Beam spread is chosen purposely broad to account for some level of error in the prediction, so essentially it is a compromise.

With the Phasor XS, electronic control of the beam allows test procedures to be developed that will yield higher Probability of Detection (POD), in the same inspection time, by allowing the choice of an ideal beam over the full inspection area. The quality of the scan is improved and the Phasor XS’ full-color, real time sector display with selectable A-Scan supplies the standard accepted method for instant and reliable sizing.

Simple change over

Building Phased Array capabilities into a successful proven operating platform ensures the transition to Phased Array inspection will be cost effective. Phasor XS’ simple menu driven operation of basic Phased Array controls puts the technology within reach of the Level II field inspector. Data is easily interpreted and the cost of training is minimal.

Standard Features GE Phasor XS

An on board data set memory is combined with removable storage via an SD card for documentation and setup storage. This ensures your operators will be working with consistent setups to get brilliant results that you can see later on the screen or computer

The unique Sector Freeze mode allows review and storage of all the A-Scans behind the image. Select your beam of interest from all of the shots for separate display and improve your sizing with focal and angle control.

Combined Phased Array and code compliant Conventional UT flaw detector
Truly portable Phased Array – less than 4 kg (7 lbs)
Electronically controlled and selectable beam angles, focus and size
Simultaneous inspection with multiple beams from a single location
Full color, real time sector display with a selectable ASCAN
Fullscreen Bscan plus Display reverse and flip
Rugged packaging to withstand heavy onsite use
Snap shot image storage of sector images and ASCANS
Dialog probes 16/64
Delay law calculator
Push button control for operation in a bag
Simple operating scheme
Image transfer via SD card

Specifications GE Phasor XS:
Display Size Resolution 6.5” VGA (640*480 pixel) color TFT, 60Hz refresh rate
Battery Type Custom Li-Ion battery pack (3S6P configuration)
Battery Life 4 hours minimum
Battery Charging External charger that connects directly to the battery pack
External Power Supply Universal input (85 – 265V / 50 – 60 Hz)
Units of Measure inch and mm
SD Card Memory Sealed compartment
Number of Cycles Focal Laws Conventional Channel: 1
Phased Array Channels: 128 (max)
Pulse repetition frequency Conventional Channel: 15 to 2000Hz
Phased Array Channels: 15 to 7680Hz
Pulser Type Conventional Channel: Spike
Phased Array Channels: Bipolar Squarewave
Pulser Voltage Conventional Channel: 300V (max)
Phased Array Channels: +/-25V to +/-75V
Pulser Energy Conventional Channel: Low, High
Phased Array Channels: n/a
Pulser Rise Time Conventional Channel: <15ns
Phased Array Channels: Not Specified
Damping Conventional Channel: 50, 500 and 1000
Phased Array Channels: n/a
Dual Mode Conventional Channel: Off and On
Phased Array Channels: n/a
Receiver input Capacitance Conventional Channel: <50pF
Phased Array Channels:
Maximum input voltage Conventional Channel: 40Vp-p
Phased Array Channels:
Bandwidth / Amplifier bandpass Conventional Channel: 0.3 to 15MHz(-3dB points)
Phased Array Channels: 0.5 to 10MHz
Direct Documentation Format Conventional Channel: JPEG
Phased Array Channels: JPEG
Probe Connections Conventional Channel: 00 Lemo/ BNC Adaptor Supplied
Phased Array Channels: Custom Supplied
Physical Probe Conventional Channel: n/a
Phased Array Channels: 1 to 64
Virtual probe Conventional Channel: n/a
Phased Array Channels: 1 to 16
Number of Cycles Conventional Channel: 1
Phased Array Channels: 1 to 128
Pulser Width (1/2 Cycle) Conventional Channel: n/a
Phased Array Channels: 40 to 500ns
Pulser Delay Conventional Channel: n/a
Phased Array Channels: 0 to 10.24us
Receiver Delay Conventional Channel: n/a
Phased Array Channels: 0 to 10.24us
Receiver Input Resistance Conventional Channel: 1000ohm (dual mode)
Phased Array Channels: 220ohm
Analog Gain Conventional Channel: 0 to 110.0dB
Phased Array Channels: 0 to 40.0dB
Digital Gain Conventional Channel: n/a
Phased Array Channels: 0 to 50.0dB
Frequency Select Conventional Channel: 2.25MHz, 5MHz, LP and HP
Phased Array Channels: 2.25MHz, 5MHz, LP and HP
Rectification Conventional Channel: PosHW, NegHW and Fullwave
Phased Array Channels: PosHW, NegHW and Fullwave
Measurement Resolution Conventional Channel: 5nsec
Phased Array Channels: 5nsec
Displayed Readings Conventional Channel: A%A, A%B, SA/, SA^, SB/, SB^
Phased Array Channels: A%A, A%B, SA/, SA^, SB/, SB^
VGA output Conventional Channel: Yes
Phased Array Channels: Yes
SD Card Memory Conventional Channel: Yes
Phased Array Channels: Yes
RS 232 interface Conventional Channel: Yes
Phased Array Channels: Yes
Auto Timebase Calibration Conventional Channel: Yes
Phased Array Channels: No
Reject Conventional Channel: 0 to 80%
Phased Array Channels: 0 to 80%
TCG Conventional Channel: 16 points (max) – 6dB/usec
Phased Array Channels: 16 points (max) – 6dB/usec
Sound Velocity Conventional Channel: .0393 – .5905”/us[1000 – 15000m/s]
Phased Array Channels: .0393 – .5905”/us[1000 – 15000m/s]
Range Conventional Channel: 5m @ steel shear velocity
Phased Array Channels: 1m @ steel shear velocity
Weight Conventional Channel: 7.5lbs (with batteries)
Phased Array Channels: 7.5lbs (with batteries)
Size Conventional Channel: 11.1”W x 6.75”H x 6.25”D (282 x 171 x 159mm)
Phased Array Channels: 11.1”W x 6.75”H x 6.25”D (282 x 171 x 159mm)
Display Delay Conventional Channel: 2.5m @ steel shear velocity
Phased Array Channels: 1m @ steel shear velocity
Gates Conventional Channel: A, B
Phased Array Channels: A,B,IF
Gate Threshold Conventional Channel: 5% to 95%
Phased Array Channels: 5% to 95%
Gate Start Conventional Channel: [0.1mm to 2m]
Phased Array Channels: 0.1mm to 1m
Gate Width Conventional Channel: [0.1mm to 2m]
Phased Array Channels: 0.1mm to 1m
Gate Modes Conventional Channel: Off, Pos, Neg[Off, Coincidence, Anticoincidence]
Phased Array Channels:
TOF Modes Conventional Channel: Flank, Peak
Phased Array Channels: Flank, Peak
Scan type Conventional Channel: n/a
Phased Array Channels: Linear or Sector
Data visualization refresh rate Conventional Channel: 60Hz
Phased Array Channels: 60Hz
Available views Conventional Channel: Ascan
Phased Array Channels: Ascan only, Image only, Ascan + Image
Dialog Languages Conventional Channel: English, Spanish, German, French, Chinese, Japanese
Phased Array Channels: English, Spanish, German, French, Chinese, Japanese
Environmental tests
Cold Storage -20C for 72 hrs, 502.4 Procedure I
Cold Operation 0C for 16 hrs, 502.4 Procedure II
Heat Storage +70C for 48 hrs, 501.4 Procedure I
Heat Operation +55C for 16 hrs, 501.4 Procedure II
Damp Heat / Humidity 10 Cycles: 10hrs at +65C down to +30C, 10 hrs at +30C up to +65C, Transition within 2 hrs, 507.4
Temperature Shock 3 Cycles: 4 hrs at –20C up to +70C, 4 hrs at +70C, Transitions within 5 minutes, 503.4 Procedure II
Vibration 514.5-5 Procedure I, Annex C, Figure 6, General exposure: 1hr each axis
Shock 6 cycles each axis, 15g, 11ms half sine, 516.5 Procedure I
Loose Cargo 514.5 Procedure II
Transit Drop 516.5 Procedure IV, 26 drops
IP54 / IEC529 Dust Proof / Dripping water proof as per IEC 529
Environmental sealing tests IP54 / IEC529 … Dust Proof / dripping water proof as per IEC 529 specifications for IP54 classification
Enviromental
op temp
Low battery indication
Amplitude variation expected over battery life
Graticule
Architectural suppression
Linearity on timebase
Pulser, Voltage p to p, rise time, duration, fall time, Reverberation ampitude, frequncy spectrum plot
Amplifier and attenuator

Reviews

There are no reviews yet.

Be the first to review “Original – GE Phasor XS Ultrasonic Phased Array”

Your email address will not be published. Required fields are marked *

GE Phasor XS Ultrasonic Phased Array
You're viewing: Original – GE Phasor XS Ultrasonic Phased Array Original price was: $5,500.00.Current price is: $3,588.00.
Add to cart
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare
Shopping cart close