Original – Pruftechnik Optalign Smart EX Shaft Alignment

Description

Pruftechnik Optalign Smart EX Shaft Alignment

Original – Pruftechnik Optalign Smart EX Shaft Alignment

Optalign smart EX remains a sought-after measurement system in the maintenance of rotating machinery such as pumps, motors, gearboxes and compressors.

Vertical and horizontal machine corrections are monitored live on the screen.
OPTALIGN smart EX is delivered in a robust and valuable light-aluminum case which is suitable for hazardous areas. PDF reports can be generated and directly saved from the system onto a USB stick. The optional wireless Bluetooth module is certified ATEX/Ex/IECEx. It allows wireless data transmission from the sensor to the computer. This is a unique capability of PRUFTECHNIK alignment systems for hazardous areas.

Standard features Optalign Smart EX

Alignment of horizontal, vertical and flange-mounted machines
Alignment of coupled, uncoupled and nonrotatable shafts
Soft foot check – measure, correct and save results
UniBeam for quick adjustment of the single laser beam
Continuous SWEEP measurement mode automatically activated as shaft is rotated – start and stop rotation at any position
Automatic evaluation of alignment condition with TolChek® and user-defined tolerances
InfiniRange® extends detector measurement range to handle gross misalignment
QuickCheck – uses a single dimension to display both horizontal and vertical coupling values
Static measurement mode – requires any 3 of the 8 available 45° measurement positions
Live monitoring of horizontal and vertical machine corrections
Result table to verify measurement repeatability
Save up to 500 measurement files in the device
Save measurement reports as PDF to a USB memory stick
Data protection – auto save and resume capability
Alignment of 6-foot machines
Checking the effects of pipe strain on shaft alignment
High resolution backlit colour TFT screen

Powerful options Optalign Smart EX

RF module for wireless data transmission
3-machine train alignment
Enter alignment targets and thermal growth values including input of dial indicator readings
Fixed feet selection – resolves base-bound and bolt-bound problems
Multipoint mode – measurement at any 3 or more positions over 60° rotation or wider
Alignment of cardan and spacer shafts
Heavy-duty rechargeable Li-Ion battery
PC software ALIGNMENT CENTER is used for preparing, analyzing, archiving measurement files and printing professional reports

Automatic evaluation of Optalign Smart EX Alignment

TolChek® – Dynamic tolerances evaluate the alignment condition based upon the machine RPM. The LEDs and Smiley provide visual indication of the alignment condition and the update status during machine correction.

Continuous SWEEP mode

SWEEP mode – As the shaft is rotated, data is automatically and continuously collected. OPTALIGN® smart EX determines the alignment condition with a shaft rotation of as little as 60°. Measurement can start at any shaft position and in any direction. This mode is quick and captures hundreds of measurement points, hence more accurate than the 3-clock positions measurement method. Most rotating machines require an accuracy close to that attained by the continuous SWEEP mode.